Visbella Bond powder C113

Features

Instruction:

1. Clean the damaged area and flatten it out
2. Use scissors to cut out a piece of repair material (A) that matches another piece of repair material (B)that is slightly larger than the
3. Evenly pour the fix powder onto the repair area/hole(powder will now be on top of ’A’). Place repair piece ‘B’ on top of the powder.
4. Use a properly heated iron to iron over repair piece ‘B for no less than 2 minutes. The powder will begin to melt and bond at 230F
5. Allow 5-10 minutes for the repair to properly cure and set

Note: If the repair area is torn, flatten the torn material out, sprinkle the fix powder on the back/inside with a piece of tissue paper covering it/keeping it in place. Then repeat steps 4 and 5

For the DIY applications like patches, logos, and name tags, simply put the fix powder on the back of the tag, place onto the desired material, and then repeat steps 4 and 5.