Bulls eye pick mw40

Bulls eye pick
These are ideal for the fabricator who needs to metal finish the area surrounding a weld seam on fabricated body work.
With a 25 inch throat, it is handy for large panels or for a hard to reach dent.
The open site gives the user a clear target for the tip to strike, and each pick comes with a standard and blunt tip to suit your style or material.
Designed for angle picking around braces, gussets, or other hard-to-reach places.
You know exactly where the pick will strike so your work is precise.
The site does not have to be flat on the surface to work, just tilt it to any angle needed to clear an underside brace and you will still get excellent results.
Designed to return to open position when released.
All metal parts.
Use the optional Blunt Tip when bumping metal.
Application Works great for precisely picking up low areas that would otherwise be difficult to raise with a pick hammer.
This tool is great for working out dents in roof panels, bonnets, boot lids, and other large areas.
The U shaped site does not need to be flat on the surface to work, just tilt to any angle needed to clear an underside brace or bracket.
Tool is sprung to return to the open position.