Replacement Hydraulic Pipe CR012-A

REPLACEMENT HYDRAULIC PIPE CR012-A

CR012-A to fit to you hydraulic ramps

For use with with the CR01 and CR012.

If your hydraulic car ramp’s hose is worn or perished, you’ll need a replacement hydraulic hose that matches the original specifications.

These are full replacement pipes from your hydraulic foot pump to the car ramp.

1. Key Specifications to Identify

• Length: Measure the existing hose from end to end.
• Diameter: Check both internal and external diameters.
• Pressure Rating: Ensure the hose can handle the required hydraulic pressure (typically 3000-6000 PSI for most car ramps).
• Fittings: Identify the type and thread size of the connectors at both ends (e.g., BSP, JIC, NPT).
• Material: Choose reinforced rubber or thermoplastic hoses rated for hydraulic use.
• REPLACEMENT HYDRAULIC PIPE CR012-A
• For use with with the CR01 and CR012.

  If your hydraulic car ramp’s hose is worn or perished, you’ll need a replacement hydraulic hose that matches the original specifications.

see other hydraulic car ramps here