The AutoVip 1400 car tilter is a cradle-frame, which can be fitted quickly and easily to the wheel hubs of any car. The frame will tip the vehicle over to allow the user to work on the under body while standing upright in perfect safety.

For more info, also see :-


Alternatively, check out the AutoVip 1700 model.

You can turn the vehicle in under 3 metres. Just place the two smooth plates under the frame. If your car has knock on wheels you can turn it by using adaptor beams which can be purchased as an optional extra.

Minimum width required 2.6m or 8ft.6ins.
Height 2m or 6ft.6ins
You can turn the car even without axles.

The AutoVip 1400 car tilter is fully adjustable.
•Greatly improved working position.
•Unrestricted access to the under body.
•No standing under the vehicle.
•Reduced dirt in your eyes while cleaning or rust proofing your vehicle.
•Less risk of welding burns.
•Work in far better light.

This gives the mechanic, the car enthusiast and the DIY motorist the opportunity to:
•Rustproof the underside of the vehicle.
•Do steel plate work.
•Control/weld/repair mechanical parts such as suspension, shock absorbers, brake pipes, etc.
•Change or repair exhaust systems.


Mounting the AutoVip onto a car

1: Jack up the car, remove all wheels and attach the AutoVIP frame to each hub with the universal adapters.
2: As the car’s centre of gravity is over the curved section of the roller, only the slightest lift will set it rolling. For most cars, you’ll be able to do this alone.
3: The stay bar is ratcheted to allow fine angle adjustment.

CJ Autos are the exclusive manufacturers of AutoVip products.

Check out the official website here –


additional extras

ct023 wheel kit
our new product makes the auto vip mobile. 
A complete wheel kit to enable you to move the car into a single garage whilst turned over to approx 90 degrees.
if you have bought our auto vip then its a simple setup to attach the wheel kit.

Adaptor Beams can be purchased which enable the AutoVip car roller to turn a vehicle , with or without axles and suspension, by bolting the beams to either bumper mounting or chassis.

why not look at our new product —-door aperture retainer item code mw15
great piece of equipment if the body shell is delicate it will keep the door opening where you want them


also :-

Weight 90 kg
Dimensions 200 × 100 × 43 cm

You may also like...

You may be interested in…