Return to previous page

Basic Car roller (with 5 stud) adaptors ct01-5

Name: Basic Car roller (with 5 stud) adaptors ct01-5
SKU: ct01-5
Availability: BackOrder

£375.00 (£450.00 inc VAT)

PRE-ORDER APPROX 4 WEEKS FROM ORDER DATE
Basic Car roller (with 5 stud).
Manufactured by CJ Autos in the UK to high standards.

Available on back-order

SKU: ct01-5

Categories: BASIC CAR ROLLER, CAR ROTISSERIES, CAR TILTERS AND CAR ROTISSERIES

Tags: roller, tilter

The CJ Autos Basic car roller (with 5 stud adaptors) puts the car on its side and lets you work standing upright.

It takes less than fifteen minutes to assemble and turn the car. Just raise one side of the car up and remove the front and rear wheels. Then bolt the correct hub plates on the hub and slide the holding pins through the frame to the hub plate. Lower the jack and attach the safety bar. It’s then all ready to roll.
For safety reasons, please also remove the battery and keep the fluids low or drained. Always tip it with the petrol neck at the top.
When using the CT01-5 Basic car roller (with 5 stud adaptors), the car can be easily turned by one person using an engine hoist or block and tackle.

MAX WEIGHT 2 1/2 TON (2500 KG. )
Suitable for use with 5 stud wheels only.

There are optional extras available for cars with 3 stud, 4 stud, wide 5 VW Porsche studs and knock ons.

Check out the full range here!

Features

•A car can be turned by one person using an engine hoist or block and tackle.
•You will need approximately 2.5 to 3 metres of space.
If your garage is not wide enough, our Optional Wheel Kit, is the answer.
Fit your car to the frame outdoors, turn the car and then just wheel it back into your garage.
Make sure the battery has been removed and the oil and fluid holes have been blanked off Tip it with the petrol neck at the top
•By using 2 axle stands you can keep the basic roller at 90 degrees
max weight 2 1/2 ton (2500 kg. )
suitable for use with 5 stud only.
optional extras for cars with 3 stud, 4 studs, wide 5 VW Porsche and knock-ons.